New

New

Packing workbenches Viking

Select options

SR Workbench

Basic part of Packing workstation is the SR workbench. These workbenches can be placed in a line to make a common working area with no gaps. Universal design allows fitting out the workplace with necessary equipment and drawer units.

Height adjustment:
650-950 mm

Load capacity:
300 kg

Temperature resistance:
300°С

Code	Dimensions
SR-15-9	1500х900 mm
SR-18-9	1800х900 mm

PO Main shelf

Rear racks included.

2 versions: 30 cm depth and 40 cm depth
Height adjustment: 1000 — 1800 mm
Load capacity: 50 kg

EP Power panel/ 1/2 EP power panel

Basic configuration consists of 4 sockets placed in aluminium case with protective contact and 3 m cable. Panel can be equipped with additional sockets, earth leakage circuit breaker, automatic fuse and a phone jack.

Nominal load capacity: 10 A
Grounding cord cross-section: 0.75 mm

DL/A Workbench lighting

4 DL/A Workbench lighting DL/A Workbench lighting is placed in an aluminum case with 2 energy-efficient luminescent 54 W lamps, light direction regulation and shadowless reflector provided. Quick switching on without shimmering, no strobing freeze.

Length: 1200 mm
Height adjustable 500 mm - 1350 mm
Illuminance at 1000 mm distance: 1200 lux central

DL/S2 Workbench LED lighting

The case for lighting unit is made of aluminum, light direction regulation provided. Available in 2 versions: standard LED lighting, lighting with dimmer.

Light source: LED lamps
Light flux: 5985 Lm
Power consumption: 43 W
Height adjustable: 500 mm - 1350 mm

DL/N2 Under-shelf local lighting

Additional local LED lighting can be mounted to any workbench series Main Shelf and Perforated panel. Provides uniform illumination level. Available in 2 versions : 60 and 90 cm.

RK Bin rail/ 1/2 RK half-size bin rail

Aluminum rail for bin storage placed along workbench length.

Load capacity: 10 kg

PFP Perforated panel/ 1/2 PFP half-size perforated panel

Panel can be equipped by different holders for additional equipment and tools storage.

D-PO shelves dividers

Available in 2 versions: 300 and 400 mm deep.

RD upper rolls holder/ 1/2 RD half-size rolls holder

A holder that helps to locate rolls of paper, film or bubble wrap above the tabletop

RD/2 lower rolls holder

A holder that helps to locate rolls of paper, film or bubble wrap below the tabletop

TPP suspended cabinet for printer with sliding shelf

Storage solution for printer or other equipment. With lower sliding shelf

1/2 PRM protective underlayer for cutting

Protective underlayer that helps to easily cut packaging materials not damaging the tabletop.

Middle upright for all kind of workbenches

Middle upright is required for all 1/2 items, it consists of upright and transversal slat which differs according to workbench’s width.

Packing workbenches Viking

SR Workbench

PO Main shelf

EP Power panel/ 1/2 EP power panel

DL/A Workbench lighting

DL/S2 Workbench LED lighting

DL/N2 Under-shelf local lighting

RK Bin rail/ 1/2 RK half-size bin rail

PFP Perforated panel/ 1/2 PFP half-size perforated panel

D-PO shelves dividers

RD upper rolls holder/ 1/2 RD half-size rolls holder

RD/2 lower rolls holder

TPP suspended cabinet for printer with sliding shelf

1/2 PRM protective underlayer for cutting

Middle upright for all kind of workbenches

Assembly instructions

Certificates

Additional shelf

Drafts holder

Main shelf

Middle upright

Monitor holder

Power panel

Rear racks

Workbench lighting

CLASSIC workbenches